Belt Sway Switch BS-102T (2NO-2NC)
Belt Sway Switch BS-102T (2NO-2NC)
IP 65 Rating
IP65 Enclosure Tested - IP (Ingress Protection) rated as "dust tight" and protected against water projected from a nozzle.
This product has a minimum quantity of 2
This is widely used for performing heavy duty jobs and meeting the requirements of the customers at international standards. The switch allows smooth running of the conveyor and protects it from damages by over swaying which can occur due to uneven loading of material, worn out idler roller bearings etc. Belt sway switch is also known as Run Off Switch
FEATURES: | ||||
• Universal (common) Cast Aluminium/ DMC enclosure. • Rationalized design and construction allows inter changeability of parts. • Special rubber seal (0 ring) on shaft for better protection against ingress of dust, dirt etc. • Special Ring & Overlap Fitting to prevent ingress of dust & water.
|
OPERATION : |
For normal running of the belt with acceptable swaying, the belt-sway switch is generally mounted on both sides and near the edge of the conveyor belt. A is generally mounted on the both sides and near the edge of the conveyor belt. A small clearance is allowed between contact roller and the belt edge to allow the normal running of the belt with acceptable swaying. When swaying exceeds normal limit, the belt edge pushes the contact roller, which drives the switch and operates the contacts. The switch reset automatically when the belt resumes normal running. |